- 产品描述
| 产品尺寸 | 长: 19.00cm | 宽: 13.00cm | 高: 5.00cm | 产品重量 | 0.210kg |
| 包装尺寸 | 长: 19.00cm | 宽: 13.00cm | 高: 5.00cm | 包装重量 | 0.210kg |
switch充电手柄
1.This grip has 1500mAh power bank inside, so you can play and charge Joy Cons without the connected cable. After being fully charged (4h), it can extend Joycon life up to 40 hours. It is a nice wireless option to play games in TV/table-top mode while charging Joycons for long play sessions. When Joycons is running out of the power, just turn on the battery pack and continue to play. Also a must have accessory for travel, especially if you don't have access to electrical outlets.
2. If both the battery pack and Joycons are running out of the power, just plug the USB C cord in the front of the grip. It will charge both Joycons and grip at the same time. So you don't have to dock Joycons back to console or charging station but easily keep playing on TV or PC while charging with the 100cm long cable, whenever the battery is low. You can also use it to charge your extra Joycons while it is not in use.
3. This grip combines the left and right Joycon into a full-size controller. The space between Joycons and the touch feeling are the same as the stock grip’s. The handles held in your palms are a little larger and more ergonomic shaped, which makes the grip slightly wider and more comfortable to hold in hands. The size of this grip is good for both children and the adults.
4. It has plastic rails and is easy to slide the controllers in and out of the grip. Even a child can do it easily by himself. No worry about Joycon stuck and damage issue. The grip also holds controllers snuggly without wobble. No worry about Joycon slipping out while playing action games like Super Smash Bros. Unlike the stock grip, there're no screws protruding in the slide slot. So it won't scratch or leave any kind of marks on your Joycons.
5.When the charging grip is not charging the Joy-Cons or the Joy-Cons are fully charged, the grip will cut off charging automatically after about 30 seconds. So you can leave the Joy-Cons in the grip and charge overnight. It also provides protection for overcharge voltage, overload current, short circuit and over temperature.
Input Voltage: 5V 1A
Output Current: 500mA * 2
Output Voltage: 5V * 2
Core Capacity: Li-Po 1500mAh
Product Size: 165x102x43mm
Package Included:
1 x Type-C Charging Cable(Can Charge Jon Con Pro Controller)
1 x Joy-Con Charging Grip
2 x Joy-Con Pro Thumb Grips
switch充电手柄













