The C CLINK standard waterproof LW-20mg Digital servo is characterized by excellent power performance, thanks also to the use of Copper and hardened steel gears and 2 ball bearings that ensure a long service life; These features make it the perfect actuator for robots and dynamic models.

An important feature of the standard digital servo LW-20mg is water resistance and its technical features make it particularly suitable for off-road vehicles. The whole servo only weights 60g, it is equipped with strong Copper & hardened steel  gears, and it is compatible with voltage 4.8V-6.6V with a maximum torque of 20.0 kg-cm and a speed of 0.16 sec/60° (6.6V).

It is mainly composed of shell, control electronics, motor,gear train and potentiometer.

The upgrading of Power HD,The performance of the new servo is more superior.

Fit Models:

LW-20MG 20KG Super Torque Digital Servo is suitable for Model airplanes, 1:10/1:8 Car models, trucks, cross-country, climbing cars, gasoline engines, robots, aerial photography,  pan and tilt, UAVs, compatible JR/futaba.

Feature: 

For: Crawler / Buggy / On-road

Shell Material: Middle Aluminum Casing With Plastic Top and Bottom

Gear Material: Copper and hardened steel 

Color:Blue and black

Specification:  

Torque(4.8V): 16.5 kg-cm (229.1 oz/in) 

Torque(6.6V): 20.0 kg-cm (277.7 oz/in)     

Speed: 0.18 sec (4.8V) │ 0.16 sec (6.6V)    

Operating Voltage:4.8 ~ 6.6 DC Volts   

Weight: 60 g (2.12 oz)                        

Bearing Type:Ball Bearing x 2             

Motor Type:DC Motor                       

Gear Type:Copper & hardened steel        

Operating Temperature:-20℃~60℃    

Working frequence:1520μs / 333hz      

Size:40.7 x 20.5 x 39.5 mm ( 1.60 x 0.80 x 1.55 in)   

waterproof level: IP67

Include: 

C CLINK Waterproof 4.8-6.6V Super Torque Digital Servo (1 pc)

Accessories (1 Set)     

The Installation Precautions:

1.Correctly install the Digital Servo on the frame, but do not install the digital servo arm first. Open the remote control power supply, and then connect the servo's line to the receiver's ch1, pay attention to the positive and negative. Red is positive, black is negative, turn on the power.

2.When the steering gear turns on the power, it receives the signal from the remote control and will return to the middle. Then adjust the alignment front wheel And install the digital servo arm，If you feel the front wheel or the digital servo arm is not in the middle, you can use the digital servo arm lever with the remote control button to minute adjustment.

3.When the steering gear turns on the power, it receives the signal from the remote control and will return to the middle. Then adjust the alignment front wheel And install the digital servo arm，If you feel the front wheel or the digital servo arm is not in the middle, you can use the digital servo arm lever with the remote control button to minute adjustment.

Note: 

Please be sure to avoid locked-rotor when using servo, locked-rotor means that artificially or machine obstructs the servo to rotate normally, the locked-rotor will lead to internal current increased several times and the temperature increases, servo will burn out.

Please Note:

** PayPal is the only online payment method we accept.

** We only ship to the confirmed address provided by PayPal,so please make sure your address in PayPal matchs the address you would like us to ship to.

** Items will be shipped within 1 business days upon receipt of payment.

**Please contact us if any shipping damage,lost,defective item,we will process refund or re-ship within 48 hours.